Home  
  The Custodial Review  
  The Concept | Media Info | Technical Specs | On-Line Ads | Contact Us | Subscribe | LinksJobs  PIR  
  You are visitor: 679228       Search Custodial Review
   
 
 

 
  AMPTEAM, Manufacturers of UNIFOLD Gutter System (Gutter Liner) - Ampteam Limited  
 

UNIFOLD™ by Ampteam is a very high quality gutter lining system which uses a unique hinge method allowing the gutter to fold along its length and this, in turn, enables the lining to enter and unfold within what would normally be considered inaccessible gutter cavities ensuring a close fit with the existing gutter and maximising gutter capacity. UNIFOLD™ has on many occasions, dependant on circumstances, actually increased the existing gutter capacity!

Ampteam is a well established company situated in Dudley in the heart of the West Midlands, UK. The company are specialist manufacturers and distributors of the unique UNIFOLD Gutter System. The company offers a professional yet personal service with a high emphasis on quality, complete with a client care that is second to none.

Apart from the misery they cause, leaking gutters cost British Industry millions of pounds every year in production disruption, stock loss and maintenance costs.

Gutters discharge water into a building predominantly due to joint failure but also due to substrate failure caused by severe corrosion. Gutters can also become overwhelmed during storm conditions.

The long term repair of leaking gutter joints is extremely difficult and most repairs, which consist usually of bandage and bitumen applications, can only be considered as an emergency contingency whilst a more permanent solution is sought, or at best, one which will last for 1 to 3 years until the process needs to be repeated.

A solution to leaking joints is to line the existing gutter, however, effective access is a common problem due to roof sheet overhang and other obstructions and most rigid gutter lining systems, such as Aluminium or G.R.P., are unable to capitalise correctly on the available space within the existing gutter cavity, leading to a reduction in gutter size with the resultant loss of valuable water capacity.

Often continuous flexible lining systems are chosen as they are perceived to have no joints and they are sometimes able to reach the extremes of the existing gutter profile.

They are, however, very prone to expansion, contraction and retention problems leading to instability and ultimate failure and these systems often cannot cope correctly with existing gutter fabrication such as sumps and side boxes, which are often ignored and corners and tees which require difficult on site fabrication and jointing, made even more difficult as the work is conducted within the restricted confines of the gutter cavity.

Any lining system must be able to correctly address the problems with which it is faced and be able to provide a true, quality assured solution for all the variations of gutter design, both past and present.

What is required is a system that is correctly designed and engineered that will maximise the available space within the existing gutter cavity, will remain rigid and stable in service, will offer an exceptional life span and be guaranteed not to leak.

Unifold is a gutter lining system that is rigid in use and as the name suggests, is able to fold, using system hinges, allowing access to the gutter cavity and then re-open, to maximise the available space within. It has an exceptional life span, well in excess of 30 years and is guaranteed for a period of 20 years including the installation.

Unifold is manufactured from an EPDM membrane that is pressure bonded to galvanized and coated steel substrate. During this process the hinges are formed, which are the essence of the system’s unique flexibility. They provide the ability to enter the most difficult of gutter cavities, maximising the available space.

The resulting laminate forms a composite sheet to the required girth that is then press formed to the correct profile.

Unifold is manufactured in 2.8m individual lengths and each unit length is securely fixed and sealed to its adjacent length prior to the cold vulcanised application of the Sureseal EPDM joint cover flashing.

This process provides, on initial application, a double sealed joint of immense integrity, however, continuing homogeneous action at the vulcanised surface ultimately provides an uninterrupted "joint free" membrane lining.

Experience has shown that Unifold is completely versatile and is able to replicate existing systems and their accessories with consummate ease.

 
   
  Tel:    01384 252777
Web: http://www.gutterliners.com
Email: unifold@ampteam.co.uk
 
Fax:   01384 252888
   
   





















     
 

Review Magazines. All rights reserved    Tel: 01234 348878 Fax: 01223 790191       Email: sales@pirnet.co.uk             Sitemap

 
  wirelessivityFreeview LCD Televisions